Netting dividing curtain


Do you need a system to protect your area against the impact of balls?

Netting dividing curtain is the right choice for you!

This innovative system is more or less used to protect against impacts of balls to the walls or ceiling.

The basic system includes all the needed material and segments with carrier structure (aluminium truss) included.

The usage of the whole system is very easy and available in various options.

We provide you detailed instructions for installation or on your request we can also provide you our installation team.

Complete system is provided with tested and certified materials and we offer 2 year warranty on motor, brake, and 5 year on whole structure.



Key points








  • All system components (engine, driving axle, safety brakes, pulleys…) are incorporated into ALU truss construction.
  • No need of additional roof brackets, subconstructions etc. ALU Truss can be fixed at any place to roof construction, roof brackets.
  • Complete system is 80% preassembled at our warehouse.
  • Short time of final assembling of local installation team. On your request we can also provide you our installation team.
  • Possibility of packing the complete system in wooden box for air transportation, truck transportation, container transportation etc.
  • Materials can be selected accordingly to the clients wishes (colour, gr/m2, etc.).
  • A complete 3-D visualization of the project can be made
  • More than 30 years of experience of installations all around the world.


Carier structure – aluminium truss

The aluminium truss 40 x 40cm is produced exclusively in the twist resistant version and with a more thick aluminium profile compared to the other structures.

A good behaviour under application of more important concentrated and distributed load is granted also for longer spans. The resistance to twisting is improved thanks to the new diagonal tubes design.

This truss is specially designed for dividing curtains. It allows to cover areas of small and large dimensions giving the chance to apply loads and keeping a perfect behaviour of the structure. In the aluminium truss the driving shaft with drive mechanism (engine, axle, bearings, supports, safety brakes) is incorporated with fixation elements.

Installation of the aluminium truss is very easy and can be in different variations (under roof structure, suspended from the ceiling…).



Motor / engine


The engine is driven by a chain-transmission or directly from drive reducer shaft. Prevention of curtain falling back requires a safety brake of the appropriate size.

The engine consists of: worm gear, interchangeable output-shaft, emergency manual operator, integrated limit switches and electrical motor.


Safety brake

Compact design with the same outer dimensions for all sizes. Visual indication of the triggering mechanism provided by a plunger (operating and braking position)

Maintenance-free and self-controlling.

Max. operating speed OPEN up to 45 rpm . Switch for safety circuit in protection class IP65.

Floating foot for horizontal installation. Dependent on the direction of rotation.

Locking catch and locking wheel (triggering mechanism) trigger the braking action if the max. operation speed is exceeded. The special tooth geometry of the ratchet wheel reduces reaction time and thus the braking distance. The structure is only subject to extremely low braking moments.


Driving shaft with winding system

All the parts of the driving shaft with winding system are incorporated within the carier structure (aluminium truss).

Complete modular system consists of:

Motor cage, Motor brackets, Screws U-shape, Motor screws, Hooks J-shape, Roof brackets, Winding discs, Cotter pins, Support axles, Bearing and brake screws, Bearging and brake brackets, Brake brackets, Bearings, Brake screws, Motor tubes, Brake tubes, Clamp + cylndrical pin, Taper protection, Dowels, Side and main blockers, Middle and side triangle, Belts, Rivet pipes, PVC plugs, Triangle pipes.

After making contract the client gets official ASSEMBLY INSTRUCTIONS with technical specifications and 3-D pictures.



Polypropylene net made of mesh size 100×100 mm, yarn thickness 3 mm , UV resistant.

Possible colour of net:

  • Black
  • White

Static calculation

Complete system is made in accordance with technical regulations and standards. We declare that we have taken into account the following technical regulations and standards:

EN DIN 18032-4:2002

SIST Eurocodes:

  • SIST EN 1990:2004 Eurocode – Basics of project design
  • Eurocode 1 – Actions on structures
  • Eurocode 3 – Design of steel structures
  • Evrocode 9 – Design of aluminium structures

After making contract the client gets official STATEMENT OF COMPLIANCE with technical

regulations and standards for the chosen product. Before contract we can send sample of static calculation from previous projects.

Static calculation document consists of:

  • Compliance statement
  • Technical report
  • Statical calculation


Approvals and certificates

Aluminium track:

Aluminium track is approved by the European Economic Area (EEA) with CE certificate which marks a certification that marks and indicates the conformity with health, safety and environmental protection standards for products sold within the EEA.


Type test according to:

  • DIN EN 12453 DIN EN 60335-1
  • DIN EN 60335-2-103


  • Certificate of conformity to DIN EN 12604 / 12605
  • Certificate no.: TorFV 3/009
  • Test report: 24034382


2 year warranty on motor/engine and safety brake

5 year on whole structure (aluminium truss and winding system)



Need more information? SEND INQUIRY